NIST Structural Ceramics Database (SCD) Database

NIST Standard Reference Database 30

Last Update to Data Content: 2002

DOI: http://dx.doi.org/10.18434/T4F30D


SCD Citation Number: Z00294

Bibliographic Information

Reference:
"The Intrinsic Thermal Conductivity of AlN," G.A. Slack, R.A. Tanzill, R.O. Pohl, and J.W. Vandersande, Journal of Physics and Chemistry of Solids, Vol. 48 [7], pp. 641-647 (1987), published by Pergamon Press.
Language: English

General Materials Processing Notes

The authors cite G.A. Slack et al., J. Cryst. Growth, Vol. 42, 560 (1970), and summarize the procedure as follows. "In this technique crystals are grown from high-purity AlN powder by vapor-phase transport in a sealed tungsten crucible. One such single crystal weighing 1.00 g, 1.41 cm long, and with an average diameter of 0.54 cm was used for the present measurements from 0.4 K-300 K. ... From 370 K to 1800 K oligocrystalline samples of high-purity sublimed AlN in the form of flat discs 1.2 cm in diameter and 0.3 cm thick were used. The average crystallite size in these discs was about 0.2 cm diameter."

Measurement Methods

Literature survey
"...heat flow was predominately along the c-axis. The (thermal conductivity) of the single-crystal sample was measured by using three different steady-state, longitudinal-heat-flow apparatuses. From 0.4 K to 1.7 K a H3 cryostat was used, from 1 K to 135 K a He4 crystat was used. ... From 145 K to 300 K a cryostat cooled by gaseous, sold nitrogen was employed. In this third cryostat the sample is placed in a vacuum; it is surrounded by a close fitting thermal shield whose temperature distribution matches that in the sample, and the temperatures are measured with thermocouples. Heat is suppled to one end of the sample by a wire-wound resistor. Values... for these steady-state methods are estimated to be accurate to ±5%. The results from 370 K to 1800 K were measured using a laser-flash diffusivity technique. ... The laser was a neodymium-doped glass unit operating at 1.06 µm with pulse lengths of 10-4-10-3 s; the infrared detector was InSb; and the sample surfaces were coated with colloidal graphite during the test to avoid laser shine-through. The sample held in an inert atmosphere in a graphite resistance furnace in order to control its temperature. Values... are estimated to be accurate to ±10%. ... From 0.4 K to 300 K the results are for heat flow along the c-axis of the hexagonal structure crystal, above 300 K the crystallites in the disc samples were primarily oriented with the c-axis parallel to the heat flow."

Index of Materials and Properties

Material Number 1: AlN

Material Specification and Properties for AlN

Material number 1 of 1
in SCD Citation Number: Z00294
Chemical Class: Nitride
Chemical Family: Al-N
Formula: AlN
Informal Name: aluminum nitride
Structure Type: Single Crystal
Manufacturer: In-House
Process: Crystal Growth

AlN

Material number 1 of 1
in SCD Citation Number: Z00294
Elemental Composition
Amount of
Element
( formula units )
Element
 
( no unit )
1 Al
1 N

Measurement Method: Reported Formula
Evaluation Status: Unevaluated

AlN

Material number 1 of 1
in SCD Citation Number: Z00294
Thermal Conductivity
Pure AlN
Thermal Cond.
( W·m-1·K-1 )
Temperature
 
( K )
Thermal
Conductivity
( W m-1 K-1 )
0.38 0.4 0.38
1.3 0.6 0.97
5.8 1.0 3.2
48 2.0 21
380 4.0 108
2000 6.0 240
5800 10.0 570
19500 15 1020
45000 20 1500
70000 30 2000
46000 45 2300
20500 60 2200
4700 100 1750
1570 150 1100
780 200 650
319 300 285
195 400 180
100 600 96
49 1000 48
24 1800 24

Measurement Method: Literature survey
Evaluation Status: Evaluated by acceptance criteria