NIST Structural Ceramics Database (SCD) Database

NIST Standard Reference Database 30

Last Update to Data Content: 2002

DOI: http://dx.doi.org/10.18434/T4F30D


SCD Citation Number: Z00498

Bibliographic Information

Reference:
"Pressure Dependence of the Lattice Constant of Diamond: Isotopic Effects," H. Fujihisa, V.A. Sidorov, K. Takemura, H. Kanda, and S.M. Stishov, JETP Letters, Vol. 63 [2], pp. 83-88 (1996), published by American Institute of Physics.
Language: English

General Materials Processing Notes

The authors cite A.T. Collins et al., J. Phys. C Solid State Phys., Vol. 21, 1363 (1988), and summarize the procedure as follows. "Crystals of 13C diamond were produced by high-pressure synthesis in a belt-type apparatus from an amorphous carbon source containing 99% of 13C carbon. ... Powder samples were prepared by crushing the diamond crystals with tungsten carbide (WC) rollers and subsequent separation of the diamond powder by the sinking method. The final product had approximately 1 µm grain size. The sample of natural diamond (99% 12C) was prepared in the same way from synthetic crystals 30 µm in size, produced by General Electric."

Measurement Methods

X-ray diffraction
"Pressures were generated in a gasketted diamond anvil cell and measured by the ruby fluorescence method. The gasket geometry and the ruby sensor position (a 15 µm spot of fine ruby powder at the center of a 150 µm gasket hole) were the same in all experiments. A 4:1 mixture of methanol and ethanol was used as the pressure transmitting medium. ... Angle-dispersive powder x-ray diffraction patterns were obtained by using synchrotron radiation from the bending magnet on the beamline BL-6B at the Photon Factory, National Laboratory for High Energy Physics (KEK). The incident beam was monochromatized to a wavelength of 0.6888 Å (18.00 keV) by a Si(111) sagitally focused double monochromator. ... the experimental errors in the determination of the lattice constants and pressure... are 0.001 Å for the lattice constants and 0.5 GPa for the pressure values. Unfortunately, we cannot properly take into account the errors introduced by the nonhydrostatic environment at pressures above 10 GPa."

Index of Materials and Properties

Material Number 1: C

Material Specification and Properties for C

Material number 1 of 1
in SCD Citation Number: Z00498
Chemical Class: Elemental Solid
Chemical Family: C
Formula: C
Informal Name: diamond
Structure Type: Polycrystalline
Manufacturer: In-House
Process: Crystal Growth

C

Material number 1 of 1
in SCD Citation Number: Z00498
Crystal Cell Axes
Axis
 
 
Isotope
 
 
Pressure
 
( GPa )
Axis Length
 
( Å )
a 12C 0.1 3.567
a 12C 1.2 3.565
a 12C 4.9 3.556
a 12C 9.7 3.545
a 12C 14.5 3.530
a 12C 19.3 3.520
a 12C 29.7 3.498
a 12C 34.5 3.485
a 13C 0.1 3.567
a 13C 1.2 3.565
a 13C 4.9 3.556
a 13C 9.7 3.544
a 13C 14.9 3.533
a 13C 20.1 3.519
a 13C 31.6 3.496
a 13C 37.9 3.482

Measurement Method: X-ray diffraction
Evaluation Status: Evaluated by acceptance criteria
Cautions:
Data were digitized from Fig. 1 of the reference.