TableAllData

Trade name ID

Identification number assigned for a particular data record

Date of measurement

Generic name of material

Trademark, trade name, or some additional material designation, if available

Type of insulation material – blanket, batt, board, block, loose-fill, etc.

Provides additional recorded information for the test specimen, if available

Identification number assigned to a particular test specimen

Name of manufacturer or third-party source of test specimen

Was an auxiliary material placed between the test specimen and apparatus plates? Yes or No

Auxiliary material, if present, placed between test specimen and apparatus plates

Were auxiliary thermocouples placed between the test specimen and apparatus plates? Yes or No

Type of auxiliary thermocouple, if used

Two-sided or one-sided mode of apparatus operation [default = 2]

If one-sided, name of other test specimen

Bulk density, including voids, of test specimen in kg∙m-3 or lb∙ft-3

Thickness of cross-section of test specimen in mm or inches

Average of hot and cold plate temperatures in °C or °F

Temperature difference across the test specimen thickness in K or °F

Time rate of steady-state heat flow through a unit area of a homogenous material induced by unit temperature gradient normal to the unit area in W∙m-1∙K-1 or Btu∙in∙h-1∙ft-2∙°F-1

Uncertainty of measurement, if specified

Amount of water, by mass, present in the specimen at test start in %, if available

Amount of water, by mass, present in the specimen at test end in %, if available

Specimen conditioning (temperature, humidity, time) prior to test, if available

Comments

Name of the test apparatus used to provide the test data

ASTM test method?