GET api/TableAllData
Get All the Data
Request Information
URI Parameters
None.
Body Parameters
None.
Response Information
Resource Description
Collection of TableAllDataName | Description | Type | Additional information |
---|---|---|---|
InsulTradenameID |
Trade name ID |
integer |
None. |
InsulMaterialID | integer |
None. |
|
InsulManufacturerID | integer |
None. |
|
TradeNameId | integer |
None. |
|
ID |
Identification number assigned for a particular data record |
integer |
None. |
Date |
Date of measurement |
string |
None. |
Material |
Generic name of material |
string |
None. |
TradeName |
Trademark, trade name, or some additional material designation, if available |
string |
None. |
Form |
Type of insulation material – blanket, batt, board, block, loose-fill, etc. |
string |
None. |
Description |
Provides additional recorded information for the test specimen, if available |
string |
None. |
SampleNo |
Identification number assigned to a particular test specimen |
string |
None. |
Manufacturer |
Name of manufacturer or third-party source of test specimen |
string |
None. |
Interposed |
Was an auxiliary material placed between the test specimen and apparatus plates? Yes or No |
string |
None. |
SheetMaterial |
Auxiliary material, if present, placed between test specimen and apparatus plates |
string |
None. |
SpecimenTC |
Were auxiliary thermocouples placed between the test specimen and apparatus plates? Yes or No |
string |
None. |
DescTC |
Type of auxiliary thermocouple, if used |
string |
None. |
Mode |
Two-sided or one-sided mode of apparatus operation [default = 2] |
string |
None. |
OtherSpec |
If one-sided, name of other test specimen |
string |
None. |
Density |
Bulk density, including voids, of test specimen in kg∙m-3 or lb∙ft-3 |
decimal number |
None. |
Delta_X |
Thickness of cross-section of test specimen in mm or inches |
decimal number |
None. |
Mean_Temp |
Average of hot and cold plate temperatures in °C or °F |
decimal number |
None. |
Delta_T |
Temperature difference across the test specimen thickness in K or °F |
decimal number |
None. |
k |
Time rate of steady-state heat flow through a unit area of a homogenous material induced by unit temperature gradient normal to the unit area in W∙m-1∙K-1 or Btu∙in∙h-1∙ft-2∙°F-1 |
decimal number |
None. |
Unc |
Uncertainty of measurement, if specified |
string |
None. |
InitMC |
Amount of water, by mass, present in the specimen at test start in %, if available |
decimal number |
None. |
FinalMC |
Amount of water, by mass, present in the specimen at test end in %, if available |
decimal number |
None. |
PreTestCond |
Specimen conditioning (temperature, humidity, time) prior to test, if available |
string |
None. |
Comments |
Comments |
string |
None. |
Apparatus |
Name of the test apparatus used to provide the test data |
string |
None. |
TestMethod |
ASTM test method? |
string |
None. |
Response Formats
application/json, text/json
[ { "insulTradenameID": 1, "insulMaterialID": 1, "insulManufacturerID": 1, "tradeNameId": 1, "id": 1, "date": "sample string 2", "material": "sample string 3", "tradeName": "sample string 4", "form": "sample string 5", "description": "sample string 6", "sampleNo": "sample string 7", "manufacturer": "sample string 8", "interposed": "sample string 9", "sheetMaterial": "sample string 10", "specimenTC": "sample string 11", "descTC": "sample string 12", "mode": "sample string 13", "otherSpec": "sample string 14", "density": 1.1, "delta_X": 1.1, "mean_Temp": 1.1, "delta_T": 1.1, "k": 1.1, "unc": "sample string 15", "initMC": 1.1, "finalMC": 1.1, "preTestCond": "sample string 16", "comments": "sample string 17", "apparatus": "sample string 18", "testMethod": "sample string 19" }, { "insulTradenameID": 1, "insulMaterialID": 1, "insulManufacturerID": 1, "tradeNameId": 1, "id": 1, "date": "sample string 2", "material": "sample string 3", "tradeName": "sample string 4", "form": "sample string 5", "description": "sample string 6", "sampleNo": "sample string 7", "manufacturer": "sample string 8", "interposed": "sample string 9", "sheetMaterial": "sample string 10", "specimenTC": "sample string 11", "descTC": "sample string 12", "mode": "sample string 13", "otherSpec": "sample string 14", "density": 1.1, "delta_X": 1.1, "mean_Temp": 1.1, "delta_T": 1.1, "k": 1.1, "unc": "sample string 15", "initMC": 1.1, "finalMC": 1.1, "preTestCond": "sample string 16", "comments": "sample string 17", "apparatus": "sample string 18", "testMethod": "sample string 19" } ]
application/xml, text/xml
<ArrayOfTableAllData xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.datacontract.org/2004/07/srd81.Models"> <TableAllData> <Apparatus>sample string 18</Apparatus> <Comments>sample string 17</Comments> <Date>sample string 2</Date> <Delta_T>1.1</Delta_T> <Delta_X>1.1</Delta_X> <Density>1.1</Density> <DescTC>sample string 12</DescTC> <Description>sample string 6</Description> <FinalMC>1.1</FinalMC> <Form>sample string 5</Form> <ID>1</ID> <InitMC>1.1</InitMC> <InsulManufacturerID>1</InsulManufacturerID> <InsulMaterialID>1</InsulMaterialID> <InsulTradenameID>1</InsulTradenameID> <Interposed>sample string 9</Interposed> <Manufacturer>sample string 8</Manufacturer> <Material>sample string 3</Material> <Mean_Temp>1.1</Mean_Temp> <Mode>sample string 13</Mode> <OtherSpec>sample string 14</OtherSpec> <PreTestCond>sample string 16</PreTestCond> <SampleNo>sample string 7</SampleNo> <SheetMaterial>sample string 10</SheetMaterial> <SpecimenTC>sample string 11</SpecimenTC> <TestMethod>sample string 19</TestMethod> <TradeName>sample string 4</TradeName> <TradeNameId>1</TradeNameId> <Unc>sample string 15</Unc> <k>1.1</k> </TableAllData> <TableAllData> <Apparatus>sample string 18</Apparatus> <Comments>sample string 17</Comments> <Date>sample string 2</Date> <Delta_T>1.1</Delta_T> <Delta_X>1.1</Delta_X> <Density>1.1</Density> <DescTC>sample string 12</DescTC> <Description>sample string 6</Description> <FinalMC>1.1</FinalMC> <Form>sample string 5</Form> <ID>1</ID> <InitMC>1.1</InitMC> <InsulManufacturerID>1</InsulManufacturerID> <InsulMaterialID>1</InsulMaterialID> <InsulTradenameID>1</InsulTradenameID> <Interposed>sample string 9</Interposed> <Manufacturer>sample string 8</Manufacturer> <Material>sample string 3</Material> <Mean_Temp>1.1</Mean_Temp> <Mode>sample string 13</Mode> <OtherSpec>sample string 14</OtherSpec> <PreTestCond>sample string 16</PreTestCond> <SampleNo>sample string 7</SampleNo> <SheetMaterial>sample string 10</SheetMaterial> <SpecimenTC>sample string 11</SpecimenTC> <TestMethod>sample string 19</TestMethod> <TradeName>sample string 4</TradeName> <TradeNameId>1</TradeNameId> <Unc>sample string 15</Unc> <k>1.1</k> </TableAllData> </ArrayOfTableAllData>