IUPAC-NIST Solubility Database
NIST Standard Reference Database 106


Glass Ball as Bullet Solubility System: Ethene with Ethylbenzene

Components:
   (1) Ethene; C2H4; [74-85-1]  NIST Chemistry WebBook for detail
   (2) Ethylbenzene; C8H10; [100-41-4]  NIST Chemistry WebBook for detail

Original Measurements:
   Nakamura, E.; Koguchi, K.; Amemiya, T., Kogyo Kagaku Zasshi, 1966, 69, 42-47.

Variables:
   Temperature = 195.15 K to 293.15 K
   Pressure = 121.6 to 1277 kPa (1.2 to 12.6 atm)

Prepared By:
   W. Hayduk

Experimental Remarks:

   An equation for Henry's constant was given: log10 H = 3.77 to 571 (T/K)–1

Experimental Data:   (Subscripts 1,2,3, ..., in column headings refer to components 1,2,3, ...)
  
t/°CT/KTemp NotePressure [kPa]Pressure NoteHenry's law constant, K [atm (mole fraction)–1]Henry Constant NoteMole Fraction (x1)
20.0293.151395.2165.8Average0.057
20.0293.151689.0119.6Average0.103
20.0293.151982.9165.8Average0.147
0.0273.151395.2148.4Average0.080
0.0273.151689.0148.4Average0.139
0.0273.151982.9148.4Average0.201
−21.2251.951395.2131.8Average0.121
−21.2251.951689.0131.8Average0.210
−21.2251.951982.9131.8Average0.306
−21.2251.9511276.7131.8Average0.395
−40.0233.151395.2120.6Average0.190
−40.0233.151689.0120.6Average0.329
−40.0233.151982.9120.6Average0.516
−60.0213.151192.5112.1Average0.160
−60.0213.151395.2112.1Average0.338
−60.0213.151486.4112.1Average0.495
−77.2195.951121.617.3Average0.159
−77.2195.951192.517.3Average0.279
−77.2195.951192.517.3Average0.284
−77.2195.951293.817.3Average0.476
−77.2195.951293.817.3Average0.464
Notes:
   1  Calculated by compiler.

Method/Apparatus/Procedure:
   For lower pressures a 200 cm3 graduated glass cell was used. Solvent was charged to 100 cm3; then the cell and contents were weighed. For degassing, ethene was pressured into the cell from a 170 cm3 ss bomb; then the cell was shaken, gas evacuated and cell recharged with ethene several times. After degassing, the cell contents were equilibrated at constant temperature and pressure for 3-4 h. After the volume of solution was measured, the sealed cell was placed in a desiccator and later weighed at room temperature. For higher pressures two cells, one glass the other ss, of identical volume were used simultaneously. The same procedure was used except that the solution volume was measured in the glass cell and the final mass in the ss cell. The glass tended to fail at high pressures.

Source and Purity of Materials:
   1. Ethene purity was 99.6%; the impurity was nitrogen, 0.4%.
   2. Ethyl benzene source and purity not given.

Estimated Errors:
   Solubility: δx1/x1 = ± 0.02 (compiler)
   Temperature: δT/K = ± 0.1
   Pressure: δP/P = ± 0.01